The IPO Window

IPO Header


As with every window header, the first button enables you to set the window type.


The triangular button expand/collapses menus. Menus provide a self-explicative way to access to all Blender functions which can be performed in the IPO Window. They are context sensitive and will change depending on the selected Object and current Mode.

Widows with menus, as the IPO Window, does not have the standard "Full Window" and "Home" header buttons, actions which have moved to the View Menu.

Menu items are in general self-explanatory and the relative functionality will be explained later on in the hotkeys section. The actions which do not have an hotkey are the Extrapolation settings:

Extend mode Constant

The end of selected IPO Curves are horizontally extrapolated.

Extend mode Direction

The ends of selected IPO Curves continue extending in the direction in which they end.

Extend mode Cyclic

The full length of the IPO Curve is repeated cyclically.

Extend mode Cyclic Extrapolation

The full length of the IPO Curve is extrapolated cyclic.

IPO Type

Depending on the active Object, the various IPO systems can be specified with these Menu button. These are (note they will not be all present at once):

  • Object Settings, such as the location and rotation, are animated for the active Object. All Objects in Blender can have this IPO block.

  • Material Settings of the active Material are animated for the active Object. A NumBut appears as an extra feature immediately to the right when this button is selected. This button indicates the number of the active Texture channel. Eight Textures, each with its own mapping, can be assigned per Material. Thus, per Material-IPO , 8 curves in the row OfsX, OfsY, ...Var are available.

  • World Used to animate a number of settings for the WorldButtons. World too has several texture channels.

  • VertexKey If the active Object has a VertexKey, the keys (Absolute or Relative) are drawn as horizontal lines. Only one IPO curve is available to interpolate between the Absolute keys, or as many curves as Keys are allowed for Relative Keys.

  • Constrain If the active Object has a constrain its influence value can ba animated via an IPO. Each constrain has its own IPO. used to display the speed-IPO .

  • Sequence The active Sequence Effect can have an IPO Curve.

  • Curve IPO If the active Object is a path Curve, this button can be used to display the speed (time) IPO.

  • Camera IPO The active camera IPO curves are shown.

  • Lamp IPO If the active Object is a Lamp, this button can be used to animate light settings, comprehensive of textures.

IPO Menu

The DataButtons can be used to control which IPO block is shown and control it.


The IPO WIndow shows the current IPO even if the linked Object is deselected.

IPO Menu

Choose another IPO from the list of available IPOs. The option Add New makes a complete copy of the current IPO . This is not visible; only the name in the adjacent button will change. Only IPOs of the same type are displayed in the menu list.


Give the current IPO a new and unique name. After the new name is entered, it appears in the list, sorted alphabetically.


If this button is displayed, there is more than one user for the IPO block. Use the button to make the IPO "Single User".

Unlink IPO

The current IPO is unlinked.

Fake User

The IPO block is saved eve in unused.

Copy to Buffer

All selected IPO Curves are copied to a temporary buffer.

Paste from Buffer

All selected channels in the IPO Window are assigned an IPO Curve from the temporary buffer. The rule is: the sequence in which they are copied to the buffer is the sequence in which they are pasted. A check is made to see if the number of IPO Curves is the same.

View Border

Draw a rectangle to indicate what part of the IPO Window should be displayed in the full window.


This buton locks the update of the 3DWindow while editing in the IPO Window, so you can see changes maked to the IPO in realtime inthe 3DWindow. This option works extremely well with relative vertex keys.

IPO Window

The IPO Window shows the contents of the IPO block. Which one depends on the IPO Type specified in the header. The standard IPO Window has a grid with the time expressed horizontally in frames and vertical values that depend on the channel. There are 2 sliders at the edge of the IPO Window. How far the IPO Window is zoomed in can be seen on the sliders, which can also be used to move the view. The right-hand part of the window shows the available channels.

To make it easier to work with rotation-IPO Curves, they are displayed in degrees (instead of in radiants). The vertical scale relation is: 1.0 'Blender unit' = 10 degrees.

In addition to the IPO Curves, the VertexKeys are also drawn here. These are horizontal blue lines; the yellow line visualises the reference Key.

Each channel can be operated with two buttons:

IPO Curve Select

This button is only displayed if the channel has an IPO Curve. The button is the same colour as the IPO Curve. Use the button to select IPO Curves. Multiple buttons can be (de)selected using SHIFT-LMB.

Channel Select

A channel can be selected whether there is an IPO Curve or not. Only IPO Curves of selected channels are drawn. Multiple channels can be (de)selected using SHIFT-LMB.

The Mouse


Create a new vertex. These are the rules:

  • There is no IPO block (in this window) and one channel is selected: a new IPO Block is created along with the first IPO Curve with one vertex.

  • There is already an IPO block, and a channel is selected without an IPO Curve: a new IPO Curve with one vertex is added

  • Otherwise a new vertex is simply added to the selected IPO Curve.

  • This is not possible if multiple IPO Curves are selected or if you are in EditMode.


Depending on the position within the window:

  • On the channels; if the window is not high enough to display them completely, the visible part can be shifted vertically.

  • On the sliders; these can be moved. This only works if you are zoomed in.

  • The rest of the window; the view is translated.


Zoom in/out on the IPO Window. You can zoom horizonally or vertically using horizontal and vertical mouse movements.


Selection works the same here as in the 3DWindow: normally one item is selected. Use SHIFT to add/remove from the selection.

  • If the IPO Window is in IPO Key mode, the IPO Keys can be selected.

  • If at least 1 of the IPO Curves is in EditMode, only its vertices can be selected.

  • VertexKeys can be selected if they are drawn (horizontal lines)

  • The IPO Curves can be selected.

RMB and drag

Select and start translation mode, i.e. the Grabber. The selection can be made using any of the four selection methods discussed above.


Adds/removes from the selection.

The HotKeys


Zoom in, zoom out.


Select the next IPO Key. If more than one IPO Key is selected, the selection is shifted cyclically.


Add the next IPO Key to the selection.


Select the previous IPO Key. If more than one Object Key is selected, the selection is shifted cyclically.


Add the previous IPO Key to the selection.


All visible curves are displayed completely, centered in the window.


All selected IPO Curves go into or out of EditMode. This mode allows you to transform individual vertices.


Select All / deselect All. If any item is selected, first everything is deselected. Placing the mouse cursor above the channels, (de)selects all channels where there is a curve.


Border select. Draw a rectangle with the LeftMouse; all items that fall within this rectangle are selected. Draw a rectangle with the RightMouse to deselect.


If one vertex or one IPO Key is selected, the current frame number is set to this position.


Duplicate IPO. All selected vertices or IPO Keys are copied. Then translation mode is started automatically.


Translation mode (the Grabber). This works on selected curves, keys or vertices. Alternatives for starting this mode:

  • RMB and drag.

The following options are available in translation mode:

  • Limitors:

  • CTRL increments of 1 frame or vertical unit.

  • SHIFT-CTRL increments of 0.1 frame or vertical unit.

  • MMB restricts the current translation to the X or Y axis. Blender calculates which axis to use, based on the already initiated mouse movement. Click MiddleMouse again to restore unlimited translation.


  • With these keys the mouse cursor can be moved exactly 1 pixel.

  • Grabber can be terminated with:

  • LMB SPACE or ENTER: move to the new position.

  • RMB or ESC: everything returns to the old position.


Toggle Handle align / free.


Set Handle auto. The selected Bezier handles are converted to auto type.


Insert Key. Vertices can be added to the visible curves in the IPO Window. A PopupMenu asks you to make a choice:

  • "Current Frame"; all visible curves get a vertex on the current frame.

  • "Selected Keys"; (only in IPO Key mode) all selected IPO Keys get vertices for each visible curve, including IPO Curves that are not part of the IPO Key.


Join vertices. Selected vertices or IPO Keys can be joined. A PopupMenu asks you to make a choice:

  • "All Selected"; all selected vertices are replaced by a new one.

  • "Selected doubles": all selected vertices that are closer to each other than 0.9 frame are joined.


IPO Key mode ON/OFF. If the IPO block is Object IPO type, the Objects are redrawn with the option DrawKey ON (see the explanation under IPO Header).



mode. The X and Y movements of the mouse are linked to the height of the IPO Curve. Thus, this works with a maximum of two selected channels or IPO Curves. The old curve is completely deleted; the new one becomes a 'linear' type. You cannot change parts of curves with recording. The scale at which this happens is determined by the view of the IPO Window. A PopupMenu asks you to make a choice:

  • "Still"; the current frame is used as the starting point.

  • "Play anim"; the animation starts, allowing you to see the correlation with other animation systems.

During recording mode, the CTRL must be held down to actually start recording. Press SPACEKEY or ENTER or LeftMouse to stop recording. Use ESCKEY to undo changes.


Scaling mode. This works on selected IPO Curves and vertices. The degree of scaling is precisely linked to the mouse movement. Try to move from the (rotation) midpoint with the mouse. In IPO Key mode, you can only scale horizontally.


  • CTRL: in increments of 0.1.

  • SHIFT-CTRL: in increments of 0.01.

  • MMB limits scaling to the X or Y axis. Blender calculates which axis to use based on the already initiated mouse movement. Click MiddleMouse again to return to free scaling.

  • ARROWS These keys allow you to move the mouse cursor exactly 1 pixel.

  • XKEY Make the horizontal scaling negative, the X-flip.

  • YKEY Make the vertical scaling negative, the Y-flip.

  • Terminate size mode with: LMB SPACE or ENTER: to finalize scaling.

    RMB or ESC : everything returns to its previous state.


Snap Menu.

  • "Horizontal": The selected Bezier handles are set to horizontal.

  • "To next": The selected handle or vertex is set to the same (Y) value as the next one.

  • "To frame": The selected handles or vertices are set to the exact frame values.

  • "To current frame": The selected handle or vertex is moved to the current frame.


If an IPO Curve is selected: "IPO Type". The type of selected IPO Curves can be changed. A PopupMenu asks you to make a choice:

  • "Constant": after each vertex of the curve, this value remains constant, and is not interpolated.

  • "Linear": linear interpolation occurs between the vertices.

  • "Bezier": the vertices get a handle (i.e. two extra vertices) with which you can indicate the curvature of the interpolation curve.

If a Key is selected: "Key Type". The type of selected Keys can be changed.

  • "Linear": linear interpolation occurs between the Keys. The Key line is displayed as a broken line.

  • "Cardinal": fluent interpolation occurs between the Keys; this is the default.

  • "BSpline": extra fluent interpolation occurs between the Keys, four Keys are now involved in the interpolation calculation. Now the positions themselves cannot be displayed precisely, however. The Key line is shown as a broken line.


Vector Handle. The selected Bezier handles are converted to vector type.


Erase selected. The selected vertices, IPO Keys or IPO Curves are deleted. If there are selected VertexKeys, they are also deleted.